Label, Disassembly Nester, Part 1 (Left Part Of Label) - GE Vivid 7 Service Manual

GE H
EALTHCARE
D FC091194, R
IRECTION EVISION
1-5-29

Label, Disassembly Nester, Part 1 (Left Part of Label)

Located on the outside of the Front-End Card Rack's Cover (inside unit).
(Label introduced October 1, 2007)
Disassembly instructions
Remove all screws on rear side of monitor cover, and remove cover.
Remove all screws on rear side of monitor front cover, and remove front cover.
Remove all screws on the cover located under the shelf underneath the monitor, and remove cover.
Detach monitor by removing four unbrako screws located underneath the monitor neck.
Remove shelf by loosening all screws underneath it and remove speakers from shelf.
Remove all screws underneath operators panel. Disconnect and remove alphanumeric keyboard
and operators panel.
Remove probe holders and front handle.
Remove all unbrako screws, which fasten the top console cable to the console and loosen the
cable.
Remove top console and horizontal movement mechanism by unscrewing the big unbrako screw on
top of the rear base of the horizontal movement mechanism.
Remove all quarter turn screws on both side panels of the system. Side panels can now be
removed.
Remove screws underneath the pedals to remove the pedal plastics.
Remove the footrest bumper by unscrewing four screws.
Remove all screws on the rear-, top- and front covers to loosen the covers.
Remove rear handle by unscrewing all screws.
Remove fan cover by removing all fastening screws.
Remove fan bracket w/fan by removing all fastening screws.
Remove all peripheral units.
Disconnect, and then remove all cables.
Detach computer by unscrewing all fastening screws.
Remove external i/o box by unscrewing all fastening screws.
Remove internal i/o box by unscrewing all fastening screws.
Remove ac-power box by unscrewing all fastening screws.
Remove ac-transformer box by unscrewing all fastening screws.
Remove sheet metal cover on electronic rack on lower right side.
Remove all PCB's from the electronic rack.
Remove the two power supplys from the electronic rack by unscrewing all fastening screws.
Unscrew two screws on the connector (front) panel of the electronic rack, and remove the panel.
Remove the electronic cabinet by unscrewing all fastening screws in front of it and behind of it.
Remove the pedal mechanism by unscrewing all fastening screws.
Remove the wheels by unscrewing all fastening screws.
Remove the Gas Spring in frame center (
removing fixation bolts.
Figure 1-18 Label, Disassembly Nester, Part 1 (Left Part of Label)
1 - 62
11
WARNING, extend to max limit before removal) by
Section 1-5 - Labels Locations
V 7 S M
IVID ERVICE ANUAL