Site Requirements; Power Requirements - GE Vivid S70 User Manual

Hide thumbs Also See for Vivid S70:

Table of Contents

Prepare the System for Use

Only qualified physicians or ultrasound sonographers should

perform scans of patients for medical diagnostic reasons.

Request training, if needed. Ensure that unauthorized personnel

do not tamper with the system.

Service representatives authorized by GE Ultrasound will

unpack and install the system. Do not attempt to install the

system alone.

All the warnings in Chapter 'Safety' on page 2-1, should be

read and understood before operating the system.

To carry out regular preventative maintenance refer to Chapter

'System Care and Maintenance' on page 15-2.

Maintain a clean environment. Turn off the circuit breaker before

cleaning the system. Refer to 'System Care and Maintenance'

on page 15-2 for cleaning instructions.

The ultrasound system must operate within the proper

environment and in accordance with the requirements described

in this section. Before using the system, ensure that the

requirements are met.

Optimal operation of the system can be obtained by

implementing the following requirements:

The ultrasound system uses a separate power outlet for 100–

240 VAC, 50/60 Hz.

Operating the system with the wrong voltage range causes

damages, voiding the factory warranty.

Site requirements

Vivid S70 / S60

BC092760-1EN 01