Makita LM001G Instruction Manual page 22

For models equipped with swing back
mower blades
1. Put the mower on its side so that the mowing
height adjusting lever comes to the upper side.
2. To lock the base plate, insert the pin into a hole on
the mower body through a hole on the base plate.
3. Turn the bolt counterclockwise with box wrench
17.
3
Fig.47
► 1. Pin 2. Base plate 3. Box wrench
4. Remove the bolt, and then base plate.
1
Fig.48
► 1. Blade support 2. Base plate 3. Bolt 4. Protrusion
NOTICE:
When installing the mower blades,
make sure that the protrusions on the blade sup-
port fit in the holes in the base plate.
1
2
4
2
3
22 ENGLISH
5. To remove the individual mower blade, turn the
bolt counterclockwise with box wrench 17 while holding
the base plate.
1
Fig.49
► 1. Base plate 2. Mower blade 3. Box wrench
6. Remove the nut, washer, spring washer, mower
blade, and bolt in order.
1
5
6
Fig.50
► 1. Bolt hole 2. Bolt 3. Mower blade 4. Spring washer
5. Washer 6. Nut
2
1
2
3
1
2
3
4
1