Makita LM001G Instruction Manual page 20

Storing
CAUTION:
When putting the machine in the
upright position, place the machine on a flat and
stable surface. If the machine is placed on an unsta-
ble surface, the machine may fall over and cause an
injury.
Store mower indoors in a cool, dry and locked place.
Don't store the mower and charger in locations where
the temperature may reach or exceed 40 °C.
1. Remove all the battery cartridges.
2. Turn the knob 90° while pulling the knob on the
lower handle to release the locking pin. Perform the
same procedure on the other side, and then fold the
handle.
Fig.40
► 1. Knob
NOTE: Supporting the handle makes it easier to
release the locking pin when pulling the knob.
1
20 ENGLISH
3. Turn the knob on both sides 90°. Make sure that
the knobs are securely fixed.
1
Fig.41
► 1. Knob
NOTICE:
Be careful not to pinch the cords when
folding the handle.
4.
Loosen the thumb nuts on both sides, and then
fold the upper handle as shown in the figure.
1
Fig.42
► 1. Thumb nut 2. Upper handle
5.
Place the machine in the upright position.
NOTE: When putting the mower in the upright posi-
tion, do not hold the handle only, but hold the mower
body and handle.
2