Honeywell E-Class Series User Manual page 237

[3] <CR> represents the line termination character as defined by the current control
code set or after use of Txx, line field terminator label format command.
If HEX/ASCII mode is selected in manual Data Input Mode, only the data for Kanji or
Binary data types will be converted, therefore the other data types and all command
characters must be entered in ASCII format. If HEX/ASCII is selected in automatic
Data Input Mode, all of the data must be entered in HEX/ASCII format.
Data Append Mode String Format, Manual Formatting – Barcode
W1D
D aa tt pp I
Where:
Field Valid Inputs
D D
aa 00, 99
tt
pp
e H, Q, M, L
m 0 – 8, none
i A, a, M, m
N, A, B, K
cdata
immediately followed by data
term <CR>, <CR><CR>
Characteristics
Model 1 (original version), barcode versions 1 through 14:
A. ECC Levels "H", "M", "Q", and "L"
l
B. Mask Selection Automatic or 0 through 8
l
C. Data Input Modes Automatic and Manual
l
D. Data Append Mode
l
Model 2 (enhanced version), barcode versions 1 through 40
A. ECC Levels "H", "M", "Q", and "L"
l
B. Mask Selection Automatic or 0 through 8
l
C. Data Input Modes Automatic and Manual
l
D. Data Append Mode
l
DPL Command Reference
Meaning
Data Append Mode String Format indicator
QR Code Number in Append Series, 2 decimal digits
The total number of QR Codes in series, 2 decimal digits
Value of Parity, 2 digits, 8 LSBs of data parity
As above
As above
As above
As above
As above
217