Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Makita DT04Z
Summary of Contents for Makita DT04Z
- Page 1 INSTRUCTION MANUAL Cordless Impact Driver DT04 IMPORTANT: Read Before Using.
-
Page 2: Specifications
SPECIFICATIONS Model: DT04 Fastening capacities Machine screw 4 mm - 8 mm (5/32" - 5/16") Standard bolt 5 mm - 14 mm (3/16" - 9/16") High tensile bolt 5 mm - 12 mm (3/16" - 1/2") No load speed (RPM) Hard impact mode 0 - 3,000 /min Soft impact mode... - Page 3 Remove any adjusting key or wrench before Under abusive conditions, liquid may be turning the power tool on. A wrench or a key left ejected from the battery; avoid contact. If con- attached to a rotating part of the power tool may tact accidentally occurs, flush with water.
-
Page 4: Functional Description
Do not install the battery cartridge causing fires, personal injury and damage. It will also forcibly. If the cartridge does not slide in easily, it is void the Makita warranty for the Makita tool and charger. not being inserted correctly. Tips for maintaining maximum... -
Page 5: Electric Brake
Electric brake This tool is equipped with an electric brake. If the tool consistently fails to quickly stop after the switch trigger is released, have the tool serviced at a Makita service ► 1. Indicator lamps 2. Check button center. - Page 6 Reversing switch action ► 1. Button Pull the switch trigger to turn on the lamp. To turn off, ► 1. Reversing switch lever release it. The lamp goes out approximately 10 seconds after releasing the switch trigger. CAUTION: Always check the direction of To keep the lamp off, turn off the lamp status.
- Page 7 Impact force grade displayed Maximum blows Purpose Example of application on panel Hard 3,900 min (/min) Tightening when force and Tightening wood screws, speed are desired. tightening bolts. Soft 1,600 min (/min) Tightening with less force to Tightening sash screws, tight- avoid screw thread breakage.
-
Page 8: Installing Hook
Standard bolt Installing hook N•m (ft•lbs) (87) M14 (9/16") (72) M12 (1/2") (58) M14 (9/16") (43) M10 (3/8") M12 (1/2") (29) ► 1. Groove 2. Hook 3. Screw M8 (5/16") M10 (3/8") The hook is convenient for temporarily hanging the tool. (14) M8 (5/16") This can be installed on either side of the tool. -
Page 9: Using Holster
Never use gasoline, benzine, thinner, alcohol or the like. Discoloration, deformation or cracks may result. To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjustment should be performed by Makita Authorized or Factory Service Centers, always using Makita replacement parts. -
Page 10: Optional Accessories
OPTIONAL ACCESSORIES CAUTION: These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose.