Installation 2. Installation
2.5.3 Wall Mounting Option
The control unit and drive unit have a wall mounting option. For the procedure about
installation, refer to RC700 Series Maintenance Manual.
Controller outer dimensions when using the wall mounting option
Dimensions of the mounting holes for the wall
Ensure the air flow around the supply and exhaust ports, and install the Controller while
leaving space from other equipment or walls as below.
* Keep the space about 200 mm or more on the top to maintenance.
Wall mounting with the front side down
30
100 mm
50 mm *
50 mm
200 mm
Wall mounting with the front side up
50 mm
50 mm
(Unit: mm)
200 mm
50 mm *
50 mm
100 mm
RC700 Series Rev.3