Specifications - Makita DTR180 Instruction Manual

ENGLISH (Original instructions)

SPECIFICATIONS

Model:
Tie wire (Optional accessory)
Diameter of rebars that can be tied
Approximate Annealing iron tie wire
number of ties
Galvanized tie wire
per reel
Poly coated tie wire
Overall length
Rated voltage
Net weight
• Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
• Specifications and battery cartridge may differ from country to country.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combinations, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
Charger
• Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING:
Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and chargers may cause injury and/or fire.
Combination of rebars that can be tied
Combination of 2 rebars
#3 (10 mm)
#4 (13 mm)
#5 (16 mm)
Combination of 3 rebars
#3 (10 mm)
#4 (13 mm)
#5 (16 mm)
From 10 mm x 10 mm to (13 mm x 2) x (13 mm x 2)
D.C.14.4 V Model
D.C.18 V Model
#3 (10 mm)
#3 x #3 (10 mm x 10 mm)
11 ENGLISH
DTR180
ø0.8 mm
From #3 x #3 to (#4 x 2) x (#4 x 2)
Approximately 120 ties
Approximately 120 ties
Approximately 105 ties
304 mm
D.C. 14.4/18 V
2.3 - 2.6 kg
BL1415N / BL1430 / BL1430B / BL1440 /
BL1815N / BL1820 / BL1820B / BL1830 /
BL1830B / BL1840 / BL1840B / BL1850 /
DC18RC / DC18RD / DC18RE / DC18SD /
DC18SE / DC18SF / DC18SH
#4 (13 mm)
#4 x #4 (13 mm x 13 mm)
BL1450 / BL1460B
BL1850B / BL1860B
#5 (16 mm)
-