Safety Stickers; Identification Of Machine; General Description - Honda UMK425E Owner's Manual

SAFETY STICKERS

Your brushcutter must be used with care.
For this reason, adhesive labels in the form of pictograms have been
placed on the machine to remind you of the main operating
precautions. Their meanings are specified below. These labels are
considered to be an integral part of the machine. If any of them
comes off or becomes difficult to read, please contact your dealer to
replace it. We also recommend that you should carefully read all the
safety instructions (see page 2).
Rotating speed
XXXX n/min.
General instructions
[1]
[2]
Authorized cutting attachments
[4]
[1] WARNING: Read the instructions carefully, and follow all
warnings and safety instructions.
[2] WARNING: Projection hazard. Ensure that all people and
animals stay at a minimum distance of 15 m when you operate
the machine.
[3] Wear eyes and ears protection, a hard hat, protective shoes and
gloves.
[4] The brushcutter is to be used with a nylon or a metal disc line
cutting attachment only. Do not use a circular saw blade with
the standard cutting attachment guard.
[5] Cutting attachment rotation speed.
[6] The engine emits toxic carbon monoxide. Do not run in an
enclosed area.
[7] Petrol is highly flammable. Stop the engine before refueling.
[9] Machine fitted with a cutting means can be thrown violently to
the side when the cutting means comes into contact with solid
object.
To prevent accidental contact with the wheeling cutting means,
keep people and pets at least 15 m away from the brushcutter
when it is in use.

IDENTIFICATION OF MACHINE

[A] Identification plate
L
WA
dB
-----
[10] [11]
[10] Sound power level
[11] CE marking
[12] Model - Type
[13] Model - Name
4 EN
[5]
[9] [2] [3]
[1] [6]
[12] [13]
[14] Year of manufacture
[15] Serial number
[16] Name and address of manufacturer

GENERAL DESCRIPTION

UEET
[34]
[19]
[21]
[20]
[A]
[18]
LEET
[27]
[21]
[26]
[23]
[19]
[A]
[20]
[18]
[7]
IDENTIFICATION OF COMPONENTS
[18] Engine
[19] Spark plug
[20] Recoil starter
[21] Air filter
[22] Fuel tank
[23] Throttle cable
[24] Clutch housing
[25] Control grip
[26] Throttle control trigger
[27] Start / Stop switch
[16]
[14]
CONTENTS OF BAG
[15]
[37] Cutting attachment guard
[38] Screw and spacer
[39] Cutting means (3-tooth) and its protection
[40] Stabilizer, spacer and nut
[41] Multipurpose wrench
[42] Hexagonal wrench
[27]
[25]
[32]
[26]
[23]
[24]
[22]
[32]
[28]
[35]
[25]
[24]
[22]
[28] Transmission shaft
[29] Transmission head
[30] Flexible cutting means
[31] Cutting means (3-tooth)
[32] Harness attachment point
[33] Double harness
[34] Bike handle
[35] Loop handle
[36] Line cutter
[41]
[42]
[40]
[29]
[31]
[28]
[33]
[29]
[30]
[36]
[38]
[39]
[37]