Makita CL117FD Instruction Manual page 10

Adjusting lengths of slide-type
extension wand
Optional accessory
Slide and hold the slide button either forwards or back-
wards to release the lock. Pull the slide pipe out into
your desired lengths. Then release the slide button to
lock the slide pipe in position.
Fig.23
► 1. Slide button 2. Slide pipe
NOTE: For secure installation, make sure to pull the
slide pipe in and out slightly to engage the lock after
releasing the slide button.
Fig.24
Cleaning (Suction)
Nozzle
Attach the nozzle to clean off tables, desks, furniture,
etc. The nozzle slips on easily.
1
Fig.25
► 1. Nozzle
1
2
Nozzle + Extension wand
The extension wand fits in between the nozzle and the
cleaner itself. This arrangement is convenient for clean-
ing a floor in a standing position.
2
3
Fig.26
► 1. Cleaner body 2. Extension wand 3. Nozzle
Corner nozzle
Fit on the corner nozzle for cleaning corners and crev-
ices of a car or furniture.
Fig.27
► 1. Corner nozzle 2. Cleaner body
You can store the corner nozzle in the nozzle holder.
2
Fig.28
► 1. Nozzle holder 2. Corner nozzle
CAUTION:
Be careful not to trap finger(s)
between the corner nozzle and the nozzle holder.
Trapping finger(s) may cause injury.
10 ENGLISH
1
2
1
1