Makita CL117FD Instruction Manual
  1. Manuals
  2. Brands
  3. Makita Manuals
  4. Vacuum Cleaner
  5. CL117FD
  6. Instruction manual

Makita CL117FD Instruction Manual

Cordless cleaner
Hide thumbs Also See for CL117FD:
Table of Contents

Advertisement

Quick Links

Download this manual
INSTRUCTION MANUAL
Cordless Cleaner
CL117FD
Read before use.

Advertisement

Table of Contents
loading

Related Manuals for Makita CL117FD

Summary of Contents for Makita CL117FD

  • Page 1 INSTRUCTION MANUAL Cordless Cleaner CL117FD Read before use.

  • Page 2: Specifications

    See the section “Symbols” for the meaning of the symbols used for the appliance. • See the chapter “MAINTENANCE” for the appropriate details of precautions during user maintenance. SPECIFICATIONS Model: CL117FD Capacity 650 ml Continuous use 3 (Max speed mode) Approx.

  • Page 3: Intended Use

    13. Do not use without dust bag and/or filters in Only for EU countries Ni-MH place. Due to the presence of hazardous com- Li-ion ponents in the equipment, waste electrical 14. Do not charge the battery outdoors. and electronic equipment, accumulators 15.

  • Page 4: Functional Description

    Do not short the built-in battery: causing fires, personal injury and damage. It will also Do not touch the terminals with any con- void the Makita warranty for the Makita product and ductive material. charger. Avoid storing built-in battery in a con-...
  • Page 5 The battery power lamp lights up and the charging Switch action starts. The light goes out after the charging is complete. For more details, refer to the instruction manual of CAUTION: battery charger. Always switch off the cleaner after each use to prevent damage to the cleaner and to extend the service life of the batteries.

  • Page 6: Parts Description

    Prefilter or high performance filter Lighting up the lamp and HEPA filter CAUTION: Do not look in the light or see the Optional accessory source of light directly. To turn on the lamp, push the ON/speed change button. Push the OFF button to turn off the lamp. During the cleaner actuating, the lamp turns on.
  • Page 7 In order to drop dust sticking on the filter in the capsule, Twist high performance filter in direction of arrow to tap the capsule 4 or 5 times with your hand. unfasten securing lip from cleaner unit and then pull off the filter.
  • Page 8 Installing or removing stay / HEPA NOTICE: Always be sure to check that high perfor- mance filter is loaded correctly prior to using cleaner. filter If they are not loaded correctly, dust will get into the motor housing, and cause motor failure. Optional accessory If the problem as described later occurs, high per- formance filter is not loaded correctly.

  • Page 9: Operation

    NOTICE: When installing the attachment with lock function, be sure to align the release button on the cleaner with the hook on the attachment. If they are not aligned, the attachment will not be locked and may come off from the cleaner. To remove the attachment, pull it off the cleaner while pushing and holding the release button.
  • Page 10 Adjusting lengths of slide-type Nozzle + Extension wand extension wand The extension wand fits in between the nozzle and the cleaner itself. This arrangement is convenient for clean- Optional accessory ing a floor in a standing position. Slide and hold the slide button either forwards or back- wards to release the lock.

  • Page 11: Maintenance

    To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjustment should be performed by Makita Authorized or Factory Service Centers, always using Makita replacement parts. NOTICE: Never use gasoline, benzine, thinner, alcohol or the like.

  • Page 12: Hepa Filter

    HEPA filter Cleaning Optional accessory NOTICE: Do not blow dust sticking on the NOTICE: Do not rub or scratch the HEPA filter cleaner and filters by air duster. It brings dust into with hard objects such as a brush and a paddle. the housing and causes failure.

  • Page 13: Troubleshooting

    The nozzle cleaning Wall mount for cordless cleaner When the nozzle brush gets dusty, clean up the dust Optional accessory with adhesive tape. NOTE: The screw to mount the holder is not included. Prepare a screw which fits with the material to screw into.
  • Page 14 Then slide the battery unit out completely. Removing built-in battery CAUTION: Do not touch the terminals with any conductive material. CAUTION: Avoid storing battery unit in a container with other metal objects such as nails, coins, etc. CAUTION: Do not expose battery unit to water or rain.

  • Page 15: Optional Accessories

    These accessories or attachments which helps to prevent the suction force from weaken- are recommended for use with your Makita appli- ing. In addition, cleaning after use is also simple. ance specified in this manual. The use of any other...
  • Page 16 Insert the dust case all the way until the two but- When the mesh filter gets dirty badly, clean it in the tons lock with a click. following procedures. Turn the mesh filter as shown in the figure and remove it while the hooks are unlocked. Fig.46 ►...
  • Page 20 Makita Europe N.V. Jan-Baptist Vinkstraat 2, 3070 Kortenberg, Belgium Makita Corporation 3-11-8, Sumiyoshi-cho, Anjo, Aichi 446-8502 Japan 885978A222 www.makita.com 20220601...

Table of Contents