Honeywell HDZ402LIWV User Manual page 94

You can set up the installed microSD card for read-only, read-and-write, or
hot swap operation by clicking the corresponding button.
Read Only: Data on card can be displayed but not modified.
•
Read & Write: Data on card can be displayed and modified.
•
Hot Swap: Card can be inserted or removed without turning off the camera.
•
If you want to erase all the data on the microSD card, click Format. A
confirmation message appears. Click OK to continue. The card is formatted
and the camera reboots.
• The camera can recognize the SD card with FAT32/exFAT/NTFS format and will
start recording video and image after you config recording to SD card correctly
without format it.
• Honeywell suggests you backup SD card data and format SD card manually
Note
before using it for camera recording because the PC can't read the video and
image stored in exFAT/NTFS SD cards (Video and image stored in FAT32 SD
card can be read and the SD card format will be FAT32 after manually
formatting.)
Configuring an FTP Server for Storage
On the FTP tab, you can enable FTP storage and configure storage settings.
To enable FTP storage:
1. Select the Enable check box.
2. In the Server Address and Port fields, enter the address and port
40X ZOOM IR PTZ DOME CAMERA USER GUIDE
81