Honeywell HDZ402LIWV User Manual page 6

40X ZOOM IR PTZ DOME CAMERA USER GUIDE
Any wall or ceiling mounting of the product should follow the
•
manufacturer's instructions and use a mounting kit approved or
recommended by the manufacturer.
POWER SOURCES - This product should be operated only from the type of
3.
power source indicated on the marking label. If you are not sure of the type
of power supplied to your facility, consult your product dealer or local power
company.
HEAT - Situate away from items that produce heat or are heat sources such
4.
as radiators, heat registers, stoves, or other products (including amplifiers).
WATER AND MOISTURE - (Indoor models only) Do not use this unit near
5.
water or in an unprotected outdoor installation, or any area classified as a
wet location.
MOUNTING SYSTEM - Use only with a mounting system
6.
recommended by the manufacturer, or sold with the product.
ATTACHMENTS - Do not use attachments not recommended by the
7.
product manufacturer as they may result in the risk of fire, electric
shock, or injury to persons.
ACCESSORIES - Only use accessories specified by the manufacturer.
8.
CLEANING - Do not use liquid cleaners or aerosol cleaners. Use a
9.
damp cloth for cleaning.
SERVICING - Do not attempt to service this unit yourself as opening or
10.
removing covers may expose you to dangerous voltage or other hazards.
Refer all servicing to qualified service personnel.
REPLACEMENT PARTS - When replacement parts are required, be sure
11.
the service technician has used replacement parts specified by the
manufacturer or have the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric shock or other
hazards. Using replacement parts or accessories other than the original
manufacturers may invalidate the warranty.
DAMAGE REQUIRING SERVICE - Unplug the unit from the outlet and refer
12.
servicing to qualified service personnel under the following conditions:
When the power supply cord or plug is damaged.
•
If liquid has been spilled, or objects have fallen into the unit.
•
If the unit has been exposed to rain or water.
•
If the unit does not operate normally by following the operating
•
instructions. Adjust only those controls that are covered by the
operating instructions as an improper adjustment of other controls
may result in damage and will often require extensive work by a
qualified technician to restore the unit to its normal operation.
If the unit has been dropped or the enclosure has been damaged.
•
When the unit exhibits a distinct change in performance - this
•
indicates a need for service.
IV