Honeywell HDZ402LIWV User Manual page 43

40X ZOOM IR PTZ DOME CAMERA USER GUIDE
By default, the camera automatically outputs color video or black-and-white video
depending on the amount of light in the scene. To output only color video, set Mode
to Color. To output only black-and-white video, set Mode to Black & White.
Sensitivity controls the sensitivity to lighting changes that cause the camera to switch
between day (color) and night (black-and-white) mode. Select Low, Medium, or High.
Delay defines the delay time before switching between modes. Select a value between
2s and 10s.
Click Save to apply the settings.
Focus & Zoom
In the Focus & Zoom area, you can set the zoom and focus
settings. Set Digital Zoom to ON or OFF.
Drag the Zoom Speed slider left or right to decrease or increase the optical zoom
speed. Click the – and + signs to make fine adjustments.
Set Focus Mode to Auto, Manual, or Semi Auto.
Auto
Manual
Semi Auto
Set Focus Limit to Auto or to a value between 10cm and
200m+. In Auto mode, the camera will automatically adjust the focus limit based on
the zoom ratio. Otherwise, the camera will only focus on objects beyond the specified
distance. For example, if the focus limit is set to 5m, the camera will only focus on
objects farther than 5 meters away.
Set Sensitivity to High, Default, or Low. The higher the value, the more quickly the objects
in the scene will come into focus.
If the lens sticks or fails to hold a sharp focus, click Lens Initialization to initialize (reset)
the lens. Click Save to apply the settings.
Illuminator
30
Focus is adjusted automatically
when the scene changes, zoom or ICR
switch.
Focus is adjusted manually by the user.
Focus is adjusted automatically
when zoom or ICR switch.