Your Phone
Figure 9: Wireless Microphone Mounted on the Charging Cradle
When the conference phone is in a call, the expansion microphone LED around the Mute
green.
When the microphone is muted, the LED is lit red. When you press the Mute button, the phone and the
expansion microphones are muted.
If the phone is paired with a wireless microphone (for example, Wireless microphone 1) and you connect the
wireless microphone to a charger, pressing the Show detail softkey indicates the charge level for that
microphone.
When the phone is paired with a wireless microphone and you connect a wired microphone, the wireless
microphone gets unpaired and the phone is paired with the wired microphone. A notification appears on the
phone screen indicating that the wired microphone is connected.
Related Topics
Energy Savings
Your administrator can reduce the amount of power that the phone screen uses when you're not using your
phone. Level of energy-saving that your administrator can set up:
• Power Save—The backlight or screen turns off when the phone has been inactive for a period of time.
Turn On Your Phone
When your phone turns off to save energy, the phone screen is blank and the Select button lights up.
Install the Wireless Expansion
Pair a Wireless
Microphone, on page 12
Unpair a Wireless
Microphone, on page 12
Install the Wireless Microphone Charging
Charge a Wireless
Microphone, on page 13
Microphones, on page 11
Cradle, on page 13
Cisco IP Conference Phone 8832 Multiplatform Phone User Guide
Energy Savings
button is lit
21