Table of Contents
Advertisement
Table 3.3 IrDA interface
Item
Communication speed, modulation
Standard
FIR
MIR
SIR
Emission unit
Peak wave length
Emission strength
Emission angle
Reception unit
Reception wave length
Incident illuminant
Communication range
Connectable devices
HT-to-HT comm.
Communication via cradle Bridge Satellite Cradle (DT-160IOE)
Table 3.4 Earphone
Item
Method
Connectable device
Table 3.5 Power supply
Item
HA-A20BAT/DT-5025LBAT
Rated voltage
Rated capacity
Operating hours
Memory backup
period
Recharge memory
backup battery
Continue.
IrDA Ver. 1.1 compatible
4 Mbps 4-value PPM modulation
1.152 M, 576 Kbps
2.4 K to 115.2 Kbps
880 to 900 nm
Type 75 mW/sr
±15°
850 to 900 nm
SIR: 0.75 mW/cm
FIR: 200 to 0.75, 0.33 to 0.12 mW/cm
0 to 1m (Maximum 25 cm at 4 Mbps)
Between DT-X11 and DT-X11
Monaural
Earphone
Specification
3.7 V
1,700 mAh (HA-A20BAT)
3,400 mAh (DT-5025LBAT)
Approx. 8 (w/HA-A20BAT)
Approx. 18 (w/DT-5025LBAT)
Approx. 4 (w/HA-A20BAT)
Approx. 10 (w/DT-5025LBAT)
10 minutes for data in RAM
2 weeks for built-in Real Time
Clock
4 days
32
Specification
NRZ modulation
NRZ modulation
2
or less
2
Specification
- In case of
Wait:Calculation:Scanning 20:1:1
- For DT-X11M10RC/M30RC
- In case of Wait: Scanning:Wireless
6.5:1.5:2.
- At moderate temperature
- Memory backup battery is fully
charged.
- Period required for the sub-battery
to be fully charged when the
battery pack is installed in the
terminal
Remark
Remark
Remark/Condition
Advertisement
Table of Contents
