Dt-167Chge Car Mounted Battery Charger - Casio DT-X11 Series Hardware Manual

2.3 DT-167CHGE Car Mounted Battery Charger

Table 2.4
Display Status LED
Input Detection switch for DT-X11 terminal
Power Input from
power
adaptor
Charge/suppl
y power
Table 2.5 Weight/Dimensions
Weight
Dimensions
Item
No. of LEDs
No. of display colors
Display content
Indicates the status of terminal being mounted on the charger.
OFF
Flashing in green
Flashing in red
Input voltage
Consumption current
Plug
Power cord
Output voltage
Output current
Charge method
Charge time
Power supply
terminals
Approx. 755 g
Approx. 119 (W) x 267 (D) x 123 (H) mm
22
Specification
1
2
Power status ("POWER")
: Power is OFF.
: Power is ON and the terminal is mounted on the
charger.
: Power is ON but the terminal is not mounted on the
charger.
Push switch
DC 12V/24V±5%
DC 12V: Approx. 1,400 mA
DC 24V: Approx. 700 mA
EIAJ RC-5320A Class 4
DT-827CAC
DC 5V±10%
2,500 mA (maximum)
Constant voltage
Approx. 2.5 hours
Approx. 5.0 hours
Power
supply
terminals
Specification
Remark
In red and green
While supplying
power.
Center: plus
With curb
function on
current
For HA-A20BAT
For
DT-5025LBAT
The illustration of
the power supply
terminals on the
GND left is viewed at
the front of the
charger.
Remark