Casio DT-X11 Series Hardware Manual page 14

No. Name
5 Wall Mount
Unit Fastening
Plate
6 Terminal Detect
Switch
7 IR Port
8 Power Contacts
9 Power Indicator
Lamp
10 Communication
Indicator Lamp
11 System Status
Indicator Lamp
12 Power Switch
13 Desktop Unit
14 DIP Switches
The holes in this plate accept screws that secure the wall mount unit in place.
This switch detects when the Handheld Terminal is not seated correctly on the
Bridge Satellite Cradle.
This port transfers data to the Handheld Terminal via IR port.
Power is supplied to the Handheld Terminal via these contacts.
This lamp indicates the power status and the mounting status of the Handheld
Terminal.
Off : Power off
Green : Power on, Handheld Terminal mounted correctly
Red : Power on, Handheld Terminal not mounted
This lamp shows when the Handheld Terminal is performing data
communication.
Off : No data communication being performed.
Green flashing : Data communication in progress.
Red : Problem with a connection between two Bridge Satellite
Cradles.
This lamp indicates whether the system is operating normally. Regardless of
whether or not a Handheld Terminal is mounted this lamp indicates the system
status and whether or not a communication operation with the system can be
performed.
Off : System is not operating.
Green : System is operating.
Turns the power on and off.
This is the base when using the Bridge Satellite Cradle in a desktop configuration.
Remove the desktop unit in the case of a wall-mount configuration.
Use these switches to configure the Bridge Satellite Cradle as required.
14
Description