Related Manuals for Casio DT-X11 Series
Summary of Contents for Casio DT-X11 Series
- Page 1 DT-X11 Series Hardware Manual (Version 1.01) CASIO Computer Co., Ltd. Copyright ©2006. All rights reserved. August 2006...
-
Page 2: Table Of Contents
Table of Contents Editorial Record Preface Chapter 1. Overview of the Products 1.1. Features 1.2. Available Models 1.2.1. Options and Interfaces 1.3. General Guide 1.3.1. DT-X11 1.3.2. DT-167CHGE Car Mounted Battery Charger 1.3.3. DT-160IOE Bridge Satellite Cradle 1.3.4. DT-169CHGE Cradle-type Battery Charger 1.3.5. - Page 3 CASIO Computer Co., Ltd. in Tokyo Japan. Information in this document is subject to change without advance notice. CASIO Computer Co., Ltd. makes no representations or warranties with respect to the contents or use of this manual and specifically disclaims any express or implied warranties of merchantability or fitness for any particular purpose.
-
Page 4: Editorial Record
Editorial Record Manual Date edited Page Content Version no. 0.90 February 2006 Tentative version 1.00 March 2006 Original version 1.01 August The content in Table 1.2 of Chapter 1.2 is corrected. The content in Table 2.9 of Chapter 2.7 is corrected. -
Page 5: Preface
IEEE802.11b WLAN and WAN card. Running under Microsoft® Windows® CE 5.0 operating system, the rugged DT-X11 is designed specifically with the transportation/delivery and logistics in mind. In this reference manual, the DT-X11 series is described as “DT-X11” or “the terminal” or “handheld terminal”. -
Page 6: Overview Of The Products
• Image capturing function (2 to 256 monochromatic tones). • Scanning performance on 1D bar code symbology is comparable to the CASIO DT-800 series handheld terminal. • Multi-step bar code read function. Support of outstanding development environment Ample Microsoft development tools provided for easy application development and an advanced debug environment. - Page 7 Aiming to a full compliance with the “Restriction of the use of certain Hazardous Substances in electronic equipment (RoHS)” set mandatory on July 1 2006 The following products have been assembled with devices, components and parts manufactured using Lead (Pb) free solder. DT-X11M10E DT-X11M10RC DT-X11M30E...
-
Page 8: Available Models
1.2 Available Models Table 1.1 List of models Wireless Communication PC Card Memory Model Scan Engine Bluetooth IEE802.11b slot FROM DT-X11M10E Laser Scanner 64MB 128MB DT-X11M10RC Laser Scanner 64MB 128MB DT-X11M30E C-MOS Imager 64MB 128MB DT-X11M30U C-MOS Imager 64MB 128MB DT-X11M30RC C-MOS Imager 64MB... -
Page 9: Options And Interfaces
1.2.1 Options and Interfaces DT -X 11 USB Port (Ver1 . 1 Function ) IrDA Printer , etc. RS -232C IrDA Port Bridge Satellite Cradle (IrDA 1. 1) DT-160IOE RS -422 RS-422 AC Adaptor Bridge Satellite Cradle AD-S42120 A - E DT -160IOE Power Supply Cradle -type Battery... -
Page 10: General Guide
1.3 General Guide 1.3.1 DT-X11 Left Front Right Back Fig. 1.2 Table 1.4 Names of parts Name Description Indicator 1 Indicates the result of a bar code reading or other read operation. : Read error Green : Read successful Indicator 2 This lamp indicates the charge status of the battery pack. - Page 11 Function Keys These keys can be assigned any function other than barcode reading. The following are the initial default settings. : Deletes one character to the left. : Inputs a hyphen (-). : Inputs a period (.). : Toggles to switch between numbers and alphabets. IR Port This port is used for IR communication with another Handheld Terminal or Bridge Satellite Cradle.
-
Page 12: Dt-167Chge Car Mounted Battery Charger
1.3.2 DT-167CHGE Car Mounted Battery Charger Views Power Indicator Lamp Power Contacts Power Switch Car plug code jack Remove button Fig. 1.3... -
Page 13: Dt-160Ioe Bridge Satellite Cradle
1.3.3 DT-160IOE Bridge Satellite Cradle The following external views show the DT-160IOE Bridge Satellite Cradle. Refer to Table 1.5 for each referenced part on the DT-160IOE. Views Back Right Bottom Front Fig 1.1 Table 1.5 Names of parts Name Description USB Port This port accepts connection of a USB cable for connection to a computer for transfer of system data and file data. - Page 14 Name Description Wall Mount The holes in this plate accept screws that secure the wall mount unit in place. Unit Fastening Plate Terminal Detect This switch detects when the Handheld Terminal is not seated correctly on the Switch Bridge Satellite Cradle. IR Port This port transfers data to the Handheld Terminal via IR port.
-
Page 15: Dt-169Chge Cradle-Type Battery Charger
1.3.4 DT-169CHGE Cradle-type Battery Charger The following external views show the DT-169CHGE (Cradle-type Battery Charger). Refer to Table 1.6 for each referenced part on the DT-169CHGE. Views Back Front Right Bottom Fig 1.2 Table 1.6 Names of parts Name Description AC Adaptor Jack Connects the AC adaptor here. -
Page 16: Dt-5022Chg Dual Battery Charger
1.3.5 DT-5022CHG Dual Battery Charger The following external views show the DT-5022CHG (Dual Battery Charger). Refer to Table 1.7 for each referenced part on the DT-5022CHG. Views Front Back Fig 1.3 Table 1.7 Names of parts Name Description Charge Indicator This lamp indicates the charge status of the battery pack(s). -
Page 17: Hardware Specifications
2. Hardware Specifications 2.1 DT-X11 Table 2.1 Item Specification Remark CPU, Memory ® Intel PXA255 Application Processor Operating clock; max 400 MHz 64 MB FROM 128 MB (user area; approx. 115 MB) FlashFX built in. ® ® Microsoft Windows CE 5.0 operating system C-MOS Imager (DT-X11M30E, DT-X11M30U, and DT-X11M30RC) Method C-MOS Imager, 752 x 480 (Wide VGA),... - Page 18 Laser Scanner (DT-X11M10E and DT-X11M10RC) Method Semi-conductor laser light Laser emitting angle Straight Wave length 650±10 nm Optical output <1 mW No. of scannings 100±20 times per second Resolution 0.127 mm (minimum) 0.45 (minimum) Print contrast signal Readable distance Approximately 40 to 300 mm Readable width Max.
- Page 19 ® Bluetooth ® Standard Bluetooth Specification Ver.1.2 Comm. range Approx. 3 m Depending on the surrounding conditions Output power Maximum. 3dBm ( PowerClass 2) Serial interface Standard USB Slave Mini B 5 Pin. Baud rate Full speed (12 Mbps) Audio Earphone jack φ2.5mm 3-pole Supports headset.
-
Page 20: Dt-160Ioe Bridge Satellite Cradle
2.2 DT-160IOE Bridge Satellite Cradle Table 2.2 Item Specification Remark Interface IrDA Standard IrDA Ver. 1.1 compatible Comm. method Half duplex Synchronization Start/stop method Comm. speed 4 Mbps (maximum) Standard USB Ver.1.1 compatible Baud rate 12 Mbps (maximum) Connector 1 VBus 2 –... - Page 21 Power Input from Input voltage DC 12V ±5% AC adaptor Consumption Approx. 1,600 mA When supplying current power or transmitting data. Plug EIAJ RC-5320A type 4 Center; Plus AC adaptor AD-S42120AE Charge/ Output voltage DC 5V ±10% supply power Output current 2,500mA(maximum) Charge method Constant voltage...
-
Page 22: Dt-167Chge Car Mounted Battery Charger
2.3 DT-167CHGE Car Mounted Battery Charger Table 2.4 Item Specification Remark Display Status LED No. of LEDs No. of display colors In red and green Display content Power status (“POWER”) Indicates the status of terminal being mounted on the charger. : Power is OFF. -
Page 23: Dt-169Chge Cradle-Type Battery Charger
2.4 DT-169CHGE Cradle-type Battery Charger Table 2.6 Item Specification Remark Display Status LED No. of LEDs No. of display colors In red and green Display content Power status (“POWER”) Input Detection switch for DT-X11 terminal Push switch Power Input from Input voltage DC 12V±5% AC adaptor... -
Page 24: Dip Switch Setting For Dt-160Ioe
2.5 DIP Switch Setting for DT-160IOE The DIP switch is located on the rear side of Bridge Satellite Cradle. Change the ON/OFF settings according to your required system configuration. The new settings do not go into effect until the power switch is turned off and then back on. Fig. -
Page 25: Status Indication With Leds
2.6 Status Indication with LEDs Various operational statuses on the DT-160IOE can be displayed using the LEDs. The following table describes LED modes and their meanings. Table 2.8 Item Specification Remark Power status indicator DT-X11 terminal is not mounted LED ON in red 2-color LED (“POWER”) DT-X11 terminal is mounted... -
Page 26: Dt-5022Chg Dual Battery Charger
2.7 DT-5022CHG Dual Battery Charger Basic Block Table 2.9 Item Specification Remark Basic function Rechargeable battery pack HA-A20BAT Battery pack Dedicated batteries only. DT-5025LBAT Large-capacity battery pack AC adaptor AD-S45150AU Input 100 to 230VAC (W/US power cord) Dedicated AC adaptors for the charger AD-S45150AE Input 100 to 230VAC (W/European power... - Page 27 Charge output terminal CH1 PIN1: + 4.22V±30mV PIN2: - Charge output terminal CH2 PIN1: + 4.22V±30mV PIN2: - Input terminal DC jack Rated DC16V, input voltage DC 8.0 to 20.0V Battery Charge Block Table 2.12 Item Specification Remark Charge control Output voltage DC 4.22V±30mV Charge current (standard mode)
- Page 28 Table 2.13 Weight/Dimensions Item Specification Remark Weight Approx. 154 g Dimensions 100 (L) x 110 (W) x 49 (H) mm...
-
Page 29: Ha-A20Bat/Dt-5025Lbat
2.8 HA-A20BAT/DT-5025LBAT Table 2.14 Specification Item Remark HA-A20BAT DT-5025LBAT Rated capacity 1,700 mAh 3,400 mAh 0.2C discharge Rated voltage 3.7 V 3.7 V 0.2C discharge Discharge end voltage 2.75V 2.75V Standard charge current 1.0 CA (=1.55A) 0 to 40 ºC 1.6A 0 to 50 ºC Charge voltage 4.2±0.05V... -
Page 30: Dt-894Cfu Cf Card Extension Unit
2.9 DT-894CFU CF Card Extension Unit Fig. 2.2 Table 2.15 Dimensions/Weight Item Specification Remark Dimensions Approx. 70 (W) x 87 (D) x 13 (D) mm With standard size cover Approx. 85 (W) x 78 (D) x 13 (D) mm With large size cover Weight Approx. -
Page 31: Interfaces
3. Interfaces 3.1 DT-X11 CF Extension Slot Table 3.1 Specification Remark Interface CFA Rev.1.3 compatible CF Type I/II 3.3V only Power voltage 3.3V±5% Supply current 300 mA (maximum) Pin Assignment Table 3.2 Memory Mode I/O Mode Memory Mode I/O Mode Pin no. - Page 32 Table 3.3 IrDA interface Item Specification Remark Communication speed, modulation Standard IrDA Ver. 1.1 compatible 4 Mbps 4-value PPM modulation 1.152 M, 576 Kbps NRZ modulation 2.4 K to 115.2 Kbps NRZ modulation Emission unit Peak wave length 880 to 900 nm Emission strength Type 75 mW/sr Emission angle...
- Page 33 Memory backup battery Battery type Button-shape Lithium rechargeable battery (CR-2032) Rated voltage 3.0 V Battery low warning Low main battery voltage VDET1: 3.4 V Warning display, but still operable. Forcible OFF VDET2: 3.0 V Forcible OFF. Low sub-battery voltage VDETS: 2.3 V Data cannot be retained.
-
Page 34: Product Identification And Reference Numbers
4. Product Identification and Reference Numbers On the back of the DT-X11 and its options, there is a bar code and numbers printed on label as shown in Fig 4.1. This bar code is represented by 15 digits of Code128 symbology and by alphanumeric characters beneath the bar code. -
Page 35: Quality References
5. Quality References This chapter will describe about references of the DT-X11 and its dedicated options concerned with environmental performance, compliance, mechanical and electric durability, etc. 5.1 Environmental Performances 5.1.1 DT-X11 Table 5.1 Item Specification Condition Temperature DT-X11M30RC Operation -20 ºC to 50 ºC 0 to 40 ºC for charging DT-X11M30E battery pack... -
Page 36: Dt-167Chge
5.1.3 DT-167CHGE Table 5.3 Item Specification Condition Temperature Operation 0 ºC to 40 ºC Storage -40 ºC to 85 ºC Humidity Operation 30 % to 80 %RH No condensation Storage 30 % to 95 %RH Storage in carton box Temperature -10 ºC to 50 ºC Humidity 30 % to 90 %RH... -
Page 37: Ha-A20Bat/Dt-5025Lbat
5.1.5 HA-A20BAT/DT-5025LBAT Table 5.5 Item Specification Condition Temperature Operation 0 ºC to 40 ºC Non-operation -5 ºC to 50 ºC When battery is not charged. Storage -10 ºC to 55 ºC Humidity Operation 20 % to 90 %RH No condensation Storage 20 % to 90 %RH Storage in carton box... -
Page 38: Dt-894Cfu
5.1.6 DT-894CFU Table 5.6 Item Specification Condition Temperature Operation -20 ºC to 50 ºC Non-operation -20 ºC to 70 ºC Humidity Operation 10 % to 80 %RH No condensation Storage 5 % to 90 %RH Storage in carton box Temperature -10 ºC to 55 ºC Humidity 90 %RH or less... -
Page 39: Electrical Performances
5.2 Electrical Performances 5.2.1 DT-X11 Table 5.7 Item Specification Remark Power consumption DC2.5A/3.7 to 5.0V Anti-static strength ±6 KV Malfunction 150 pF, 330ohm ±12 KV Destruction 5.2.2 DT-160IOE/DT-169CHGE Table 5.8 Item Specification Remark Current Approx. 0.1 A When DT-X11 is not mounted on. consumption Approx. -
Page 40: Dt-5022Chg
5.2.4 DT-5022CHG Table 5.10 Item Specification Remark Anti-static strength - ESD method: 250 pF, 100 ohm ±5 KV - Probe: Finger type Malfunction - Polarity: ± ±10 KV Destruction 5.2.5 HA-A20BAT/DT-5025LBAT Table 5.11 Item Specification Remark Anti-static strength - ESD method: 250 pF, 100 ohm ±5 KV - Probe: Finger type Malfunction... -
Page 41: Mechanical Performances
5.3 Mechanical Performances 5.3.1 DT-X11 Table 5.13 Item Specification Condition Resistance to drop impact(height) In bare condition 120 cm Onto concrete, three times on each of the 6 sides and 4 corners. In individual carton box 70 cm or less Onto concrete, one time on each of In master carton box 50 cm or less... - Page 42 5.3.4 HA-A20BAT/DT-5025LBAT Table 5.16 Item Specification Condition Resistance to vibration - 10 to 55 Hz, In X,Y, and Z directions - Reciprocally for 15 minutes - While the power is being turned off. Resistance to vibration - 10 to 55 Hz, In X,Y, and Z directions (in carton box) - Reciprocally for 15 minutes Resistance to impact...
- Page 43 5.4 Reliability 5.4.1 DT-X11 Table 5.18 Item Specification Remark/Condition Backlight 5,000 hours At half-life period Scanner module 10,000 hours C-MOS Imager 300,000 hours USB connector 5,000 times PC Card slot cover 100 times Trigger keys 1,000,000 times Each trigger key Other keys 500,000 times Mounting/removing of...
- Page 44 5.4.3 DT-5022CHG Table 5.20 Item Specification Remark MTBF 210,000 hours or more MIL-HDBK217F Protection from short Internal circuit is protected from a short between the charge terminals...
- Page 45 5.5 Compliance 5.5.1 DT-X11 Table 5.21 DT-X11M30 DT-X11M10E DT-X11M10RC Category Standard Remarks DT-X11M30E DT-X11M30RC Safety UL1950 3 Edition EN60950-1 GB4943 WLAN Type FCC part 15C, Approval OET-65(SAR) Bluetooth EN300328-2 V1.21 Type SRRC China Approval Laser Beam EN60825-1:1996 IEC60825 China FCC part 15B EN301489-17 V1.1.1(09-2000) GB9245...
- Page 46 6. Cable Specifications 6.1 For Chain Connection and Short Length Length; 1 meter or less Max. 1m Cable.(see Table 6 . 1 ) Modular plug compatible with 6/6-6 FR SYK50 by Sanyo Industrial Co . 1 2 3 4 5 6 1 2 3 4 5 6 Fig.
- Page 47 6.2 For Chain Connection and Long Length Length; 1 meter or longer Max. 1,000m Cable compatible with SK -UTP 100M3P by Sanyo Industrial Co . Modular plug compatible with 6/6-6 FR SYK50 by Sanyo Industrial Co . 1 2 3 4 5 6 1 2 3 4 5 6 Fig.
- Page 48 7. Precautions 7.1 Handling Precautions for short-term storage (1 to 2 days period) • If the DT-X11 is to be stored over holidays (including Saturday and Sunday), replace the HA-A20BAT (or DT-5025LBAT) battery pack with fully charged one before it is stored. This will conserve the memory backup battery and ensure retention of data on the DT-X11.
- Page 49 • Do not use the battery pack in other devices than the specified products by CASIO. The performance or service life of it may be reduced or abnormal current may flow to cause it to become hot, smoke, explode, or ignite.
- Page 50 • The battery pack has a specific polarity. Do not force it into the DT-X11 when installing. Check the polarity. If the battery pack is connected backwards, it can be incorrectly charged and have an abnormal chemical reaction induced, causing it to become hot, smoke, explode, or ignite.
- Page 51 If there is an abnormality on the terminal, immediately turn off the Power switch, and be sure to remove the batteries and unplug the AC adaptor from the wall outlet, then contact a CASIO distributor for repair. •...