44 Mechanical installation
Unpacking the transport package
Unpack the transport package as follows:
1. Undo the screws that hold the wooden elements of the transport crate together.
2. Remove the elements.
3. Remove the clamps with which the drive cabinet is mounted onto the transport pallet
by undoing the fastening screws.
4. Remove the plastic wrapping.
Checking the delivery
The drive delivery contains:
•
drive cabinet line-up
•
option modules (if ordered) installed onto the control unit at the factory
•
appropriate drive and option module manuals
•
delivery documents.
Check that there are no signs of damage. Before attempting installation and operation,
check the information on the type designation labels of the drive to verify that the delivery
is of the correct type. See section
Moving the drive cabinet
Move drive cabinet carefully in the upright position.
Transportation of the cabinet on its back is only allowed if it is packed for such
transportation at the factory. If the cabinet needs to be laid on its back, support it from
below beside the cubicle seams. 1) cabinet back panel; 2) support.
1
2
2
2
Type designation key
1
2
on page 38.