Maintenance
Contents of this chapter
This chapter contains preventive maintenance instructions.
Maintenance intervals
If installed in an appropriate environment, the drive requires very little maintenance. The
table below lists the routine maintenance intervals recommended by ABB. The
recommended maintenance intervals and component replacements are based on
specified operational and environmental conditions.
Note: Long-term operation near the specified maximum ratings or environmental
conditions may require shorter maintenance intervals for certain components.
The tables below contain user tasks. For tasks to be performed by ABB and more details
on the maintenance, consult your local ABB Service representative. On the Internet, go to
www.abb.com/searchchannels.
Descriptions of symbols
Action
Description
I
Visual inspection and maintenance action if needed
P
Performance of on/off-site work (commissioning, tests, measurements or other work)
R
Replacement of component
Recommended annual maintenance actions by the user
ABB recommends these annual inspections to ensure the highest reliability and optimum
performance.
Action
Target
I
IP42 air inlet and outlet meshes on the cabinet doors
Maintenance 111
12