Table of Contents
Advertisement
Materials
Cabinet
Busbars
Fire safety of materials
(IEC 60332-1)
Package
Disposal
Applicable standards
EN 61800-5-1:2007
EN 60204-1:2006 +A1
2009
IEC/EN 60529:1991 + A1
2000
EN 61800-3:2004
Compliance with the EN 61800-3:2004
Definitions
EMC stands for Electromagnetic Compatibility. It is the ability of electrical/electronic
equipment to operate without problems within an electromagnetic environment. Likewise,
the equipment must not disturb or interfere with any other product or system within its
locality.
First environment includes establishments connected to a low-voltage network which
supplies buildings used for domestic purposes.
Second environment includes establishments connected to a network not supplying
domestic premises.
Hot-dip zinc coated 1.5 mm thick steel sheet (thickness of coating approximately
20 micrometers). Polyester thermosetting powder coating (thickness
approximately 80 micrometers) on visible surfaces, color RAL 7035 and RAL
9017. PC/ABS 3 mm, color NCS 1502-Y (RAL 9002 / PMS 1C Cool Grey).
Tin-plated copper
Insulating materials and non-metallic items mostly self-extinctive
Standard package:
• timber, polyethylene sheet (thickness 0.2 mm), stretch film (thickness0.023
mm), PP tape, PET strap, sheet metal (steel)
• for land and air transport when planned storage time is less than 2 months or
when storage can be arranged in clean and dry conditions less than 6 months
• can be used when products will not be exposed to corrosive atmosphere
during transport or storage
The main parts of the drive can be recycled to preserve natural resources and
energy. Product parts and materials should be dismantled and separated.
Generally all metals, such as steel, aluminum, copper and its alloys, and
precious metals can be recycled as material. Plastics, rubber, cardboard and
other packaging material can be used in energy recovery. Printed circuit boards
and DC capacitors (C1-1 to C1-x) need selective treatment according to
IEC 62635 guidelines. To aid recycling, plastic parts are marked with an
approppriate identification code.
Contact your local ABB distributor for further information on environmental
aspects and recycling instructions for professional recyclers. End of life
treatment must follow international and local regulations.
The drive complies with the standards below. The compliance with the European
Low Voltage Directive is verified according to standard EN 61800-5-1.
Adjustable speed electrical power drive systems. Part 5-1: Safety requirements
– electrical, thermal and energy
Safety of machinery. Electrical equipment of machines. Part 1: General
requirements. Provisions for compliance: The final assembler of the machine is
responsible for installing emergency-stop device.
Degrees of protection provided by enclosures (IP code)
Adjustible speed electrical power drive systems. Part 3: EMC requirements and
specific test methods
Technical data 169
Advertisement
Table of Contents
