Policy Url-Rewrite - Cisco Catalyst 6500 Series Command Reference Manual

Chapter 2 Commands for the Catalyst 6500 Series SSL Services Module

policy url-rewrite

To enter the URL rewrite configuration submode, use the policy url-rewrite command. In URL rewrite
configuration submode, you can define the URL-rewrite content policy that is applied to the payload.
Syntax Description url-rewrite-policy-name
Defaults
This command has no default settings.
Command Modes Context subcommand mode
Command History Release
SSL Services Module
Release 2.1(1)
SSL Services Module
Release 3.1(1)
Usage Guidelines URL rewrite allows you to rewrite redirection links only.
A URL rewrite policy consists of up to 32 rewrite rules for each SSL proxy service.
Table 2-6
Table 2-6 Proxy-policy Configuration Submode Command Descriptions
default
exit
help
[no] url url-string [clearport port-number |
sslport port-number]
url-string—Specifies the host portion of the URL link to be rewritten; it can have a maximum of
251 characters. You can use the asterisk (*) wildcard only as a prefix or a suffix of a hostname in a
rewrite rule. For example, you can use the hostname in one of the following ways:
•
•
•
OL-9105-01
policy url-rewrite url-rewrite-policy-name
Modification
Support for this command was introduced on the Catalyst 6500 series
switches.
The policy url-rewrite command (entered in context subcommand mode)
replaces the ssl-proxy policy url-rewrite command (entered in global
subcommand mode).
lists the commands that are available in proxy-policy configuration submode.
Sets a command to its default settings.
Exits from proxy-policy configuration submode.
Provides a description of the interactive help system.
Allows you to configure the URL string to be rewritten. Use the no form of
this command to remove the policy.
www.cisco.com
*.cisco.com
wwwin.cisco.*
URL rewrite policy name.
Catalyst 6500 Series Switch SSL Services Module Command Reference
policy url-rewrite
2-49