Chapter 2
Commands for the Catalyst 6500 Series SSL Services Module
debug ssl-proxy
To turn on the debug flags in different system components, use the debug ssl-proxy command. Use the
no form of this command to turn off the debug flags.
Syntax Description
app
content type
fdu type
flash
module module
health-probe
ipc
pki type
ssl type
tcp type
vlan
Defaults
This command has no default settings.
Command Modes
EXEC
OL-9105-01
debug ssl-proxy {app | content [type] | fdu [type] | flash [module [module]] | health-probe | ipc |
pki [type] | ssl [type] | tcp [type] | vlan}
Turns on App debugging.
Turns on content debugging; (optional) type valid values are detail, error,
ipc, module module, rewriting, and scanning. See the "Usage Guidelines"
section for additional information.
Turns on FDU debugging; (optional) type valid values are cli, hash, ipc, and
trace. See the "Usage Guidelines" section for additional information.
Turns on Flash debugging.
Specifies the module to be debugged.
The available options for the module variable are as follows:
fdu—FDU CPU
•
ssl1—SSL1 CPU
•
tcp1—TCP1 CPU
•
Turns on health probe debugging.
Turns on IPC debugging.
Turns on PKI debugging; (optional) type valid values are cert, events,
history, ipc, and key. See the "Usage Guidelines" section for additional
information.
Turns on SSL debugging; (optional) type valid values are alert, error,
handshake, and pkt. See the "Usage Guidelines" section for additional
information.
Turns on TCP debugging; (optional) type valid values are event, packet,
state, and timers. See the "Usage Guidelines" section for additional
information.
Turns on VLAN debugging.
Catalyst 6500 Series Switch SSL Services Module Command Reference
debug ssl-proxy
2-23