Ssl-Proxy Ssl Ratelimit - Cisco Catalyst 6500 Series Command Reference Manual

Chapter 2 Commands for the Catalyst 6500 Series SSL Services Module

ssl-proxy ssl ratelimit

To prohibit new connections during overload conditions, use the ssl-proxy ssl ratelimit command.
Use the no form of this command to allow new connections if memory is available.
Syntax Description
This command has no arguments or keywords.
Defaults This command has no default settings.
Command Modes Global configuration
Command History Release
Cisco IOS Release
12.1(13)E and
SSL Services Module
Release 1.1(1)
Examples This example shows how to prohibit new connections during overload conditions:
ssl-proxy (config)# ssl-proxy ssl ratelimit
ssl-proxy (config)#
This example shows how to allow new connections during overload conditions if memory is available:
ssl-proxy (config)# no ssl-proxy ssl ratelimit
ssl-proxy (config)#
OL-9105-01
ssl-proxy ssl ratelimit
no ssl-proxy ssl ratelimit
Modification
Support for this command was introduced on the Catalyst 6500 series
switches.
Catalyst 6500 Series Switch SSL Services Module Command Reference
ssl-proxy ssl ratelimit
2-95