How To Find Command Options - Cisco Catalyst 6500 Series Command Reference Manual

How to Find Command Options

Table 1-1
Command
command ?
command keyword ?
This example shows how to obtain a list of commands that begin with a particular character string or
complete a partial command name:
ssl-proxy# tu?
tunnel
simpson1-2# tu
This example shows how to list all commands available for a particular command mode:
ssl-proxy(config)# ?
Configure commands:
aaa
access-list
alias
arp
async-bootp
banner
boot
bridge
buffers
cdp
class-map
.
.
.
Output is truncated.
This example shows how to list a keyword's associated arguments:
ssl-proxy(config-if)# channel-group 1 mode ?
auto
desirable
on
ssl-proxy(config-if)#
How to Find Command Options
This section provides an example of how to display syntax for a command. The syntax can consist of
optional or required keywords. To display keywords for a command, enter a question mark (?) at the
configuration prompt or after entering part of a command followed by a space. The Catalyst 6500 series
SSL Services Module software displays a list of available keywords along with a brief description of the
keywords. For example, if you are in global configuration mode and want to see all the keywords for the
ssl-proxy command, you enter ssl-proxy ?.
Catalyst 6500 Series Switch SSL Services Module Command Reference
1-2
Getting Help (continued)
Authentication, Authorization and
Accountin
Add an access list entry
Create command alias
Set a static ARP entry
Modify system bootp parameters
Define a login banner
Modify system boot parameters
Bridge Group.
Adjust system buffer pool parameters
Global CDP configuration subcommands
Configure QoS Class Map
Enable PAgP only if a PAgP device is detected
Enable PAgP unconditionally
Enable Etherchannel only
Purpose
List a command's associated keywords. Leave a
space between the command and question mark.
List a keyword's associated arguments. Leave a
space between the keyword and question mark.
Chapter 1 Command-Line Interface
OL-9105-01