Chapter 5
SNMP MIB Installation and Configuration
Table 5-12 cerent15216EdfaOpGroup Variable Descriptions (continued)
Variable
cerent15216EdfaOpSrcFile
Name
cerent15216EdfaOpTftpSrv
Addr
cerent15216EdfaOpReset
5.4.8 VersionGroup Table
The cerent15216EdfaVersionGroup table allows users to display the currently loaded image and the
image to be loaded after cutover.
Table 5-13 cerent15216EdfaVersionGroup Variable Descriptions
Variable
cerent15216EdfaCurrentVersion
cerent15216EdfaAlternateVersion
5.5 Setting Up Traps
Traps are asynchronous notifications sent from the ONS 15216 EDFA2 to a predetermined location (IP
address, subnet mask, etc.). A community entry must be created prior to remotely setting up traps using
either Telnet or a terminal server.
cerent15216Edfa.mib that initiate a trap.
78-16033-01
F I N A L D R A F T - C I S C O C O N F I D E N T I A L
Maximum
Syntax
Access
DisplayString (0 to
Read-write Source file name for the Load
127 characters)
IpAddress
Read-write TFTP file server address for the
cerent15216EdfaActio
Read-write When "perform" is written to this
n
Table 5-13
describes cerent15216EdfaVersionGroup table variables.
Syntax
DisplayString (0 to 255
characters)
DisplayString (0 to 255
characters)
Table 5-14 on page 5-22
Description
operation.
Load operation.
object, a software reset is
performed.
Maximum
Access
Description
Read-only
The version of the
currently loaded image.
Read-only
The version of the
image to be loaded after
a cutover is performed.
displays the alarm notification types in the
Cisco ONS 15216 EDFA2 Operations Guide
Setting Up Traps
5-21