Installing The Chassis In A 23-Inch Telco Rack - Cisco 3640 Installation Manual

Installing the Chassis in a 23-Inch Telco Rack

You can install the Cisco 3640 router in a Telco rack with either the front or the rear panel facing
forward. The brackets must be correctly attached to the chassis, according to the orientation.
Complete the applicable procedure below, depending on the required chassis orientation in the rack.
Front-Panel Forward Installation
Install the Cisco 3640 chassis in the rack as shown in Figure 3, and secure it in place using the screws
provided with the rack.
Figure 3 Rack Installation with Front Panel Facing Forward
SYSTE M
RPS
CON
AUX
78-11336-01
0 1 2 3
ACTIV E
READ Y
PCM CIA
Center-Mount Bracket Installation Guide for Cisco 3640 Routers
Installing the Chassis in a 23-Inch Telco Rack
1
0
Center mount
bracket
2
1
2
1
7