Cisco 3640 Installation Manual page 6

Attaching the Center-Mount Brackets to the Chassis
Rear-Panel Forward Installation
Attach one bracket to each side of the Cisco 3640 chassis as shown in Figure 2.
•
•
•
Figure 2
Center-Mount Bracket Installation Guide for Cisco 3640 Routers
6
Position the angled end of the bracket toward the front of the chassis, flush with the back of the
bezel.
Insert the four screws at the front into the bracket holes numbered "2."
Insert the two screws at the rear into the two lined-up holes.
Bracket Attachment with Rear Panel Facing Forward
The second bracket attaches to the other side of the chassis.
Use holes numbered 2 for rear-panel forward.
2
1
2
1
78-11336-01