Clutch Drum / Chain Sprocket; Sprocket And Clutch Drum With Needle Bearing - Makita EA6100P Repair Manual

02 CLUTCH DRUM / CHAIN SPROCKET

Remove the sprocket guard, bar, and chain.
Release the chain brake.
Remove the circlip 5 with the universal
wrench.
Remove cup washer.
Repair Manual EA6100P / EA6101P
4
5
Sprocket and clutch drum with needle
bearing
Check the chain sprocket 4 for damage and
wear.
Important customer information:
Before installing a new saw chain, always
check the condition of the chain sprocket. A
worn chain sprocket will damage a new saw
chain, and must be replaced.
Check the clutch drum needle bearing for
wear and damage.
Assembly the bearing with multi-purpose high-
performance grease (944.360.000).
Check the inside and outside of the clutch
drum 3 for damage and wear.
Replace the clutch drum if annealing.
Note: Make sure to assemble with thrust
washer 1!
Note: Always use a new circlip 5
(927.408.000)!
1
When assembling the clutch drum, make
2
sure that the lug of the oil pump drive 2 is
not positioned on the oil pump drive. When
3
inserting, turn the clutch drum slightly.
7