Cisco Aironet CB20A Configuration Manual page 6

Setting System Parameters
Table 5-2
Parameter
Network Type
Go to the next section to set additional parameters or click OK to return to the Profile Manager screen.
On the Profile Manager screen, click OK or Apply to save your changes.
Cisco Aironet 340, 350, and CB20A Wireless LAN Client Adapters Installation and Configuration Guide for Windows
5-6
System Parameters (continued)
Description
Specifies the type of network in which your client adapter is installed.
Options: Ad Hoc or Infrastructure
Default: Infrastructure
Network Type
Ad Hoc
Infrastructure
Chapter 5 Configuring the Client Adapter
Description
Often referred to as peer to peer. Indicates
that your wireless network consists of a
few wireless devices that are not
connected to a wired Ethernet network
through an access point. For example, an
ad hoc network can be set up between
computers in a conference room so users
can share information in a meeting.
Indicates that your wireless network is
connected to a wired Ethernet network
through an access point.
OL-1394-08