Setting Advanced Ad Hoc Parameters - Cisco Aironet CB20A Configuration Manual

Chapter 5 Configuring the Client Adapter

Setting Advanced Ad Hoc Parameters

Setting Advanced Ad Hoc Parameters
You can set advanced ad hoc parameters only if your client adapter has been set to operate in an ad hoc
Note
network. See the Network Type parameter in Table 5-2.
The Advanced (Ad Hoc) screen (see Figure 5-4) enables you to set parameters that control how the client
adapter operates within an ad hoc network. To access this screen, choose the Advanced (Ad Hoc) tab
from the Properties screens.
Figure 5-4 Advanced (Ad Hoc) Screen
Cisco Aironet 340, 350, and CB20A Wireless LAN Client Adapters Installation and Configuration Guide for Windows
5-18
OL-1394-08