Cisco Aironet CB20A Configuration Manual page 58

Setting Network Security Parameters
Enabling PEAP
Follow these steps to enable PEAP.
For EAP type, choose PEAP.
Step 1
Click Properties. The PEAP Properties screen appears (see
Step 2
Figure 5-17 PEAP Properties Screen
Check the Validate server certificate check box if server certificate validation is required
Step 3
(recommended).
If you want to specify the name of the server to connect to, check the Connect only if server name ends
Step 4
with check box and enter the appropriate server name suffix in the field below.
Note
Note
Cisco Aironet 340, 350, and CB20A Wireless LAN Client Adapters Installation and Configuration Guide for Windows
5-58
If you enter a server name and the client adapter connects to a server that does not match the
name you entered, you are prompted to accept or cancel the connection during the authentication
process.
If you leave this field blank, the server name is not verified, and a connection is established as
long as the certificate is valid.
Chapter 5 Configuring the Client Adapter
Figure 5-17).
OL-1394-08