Cisco Aironet CB20A Configuration Manual page 46

Setting Network Security Parameters
Perform one of the following to enable manual PAC provisioning:
Step 10
From the Select a PAC Authority To Use with This Profile drop-down list, select the PAC authority
•
that is associated with the network defined by the profile's SSID. The list contains the names of all
the PAC authorities from which you have previously provisioned a PAC.
• If the PAC authority drop-down list is empty or does not contain the name of a desired PAC authority,
follow these steps to import a PAC file:
a.
Figure 5-9
b.
c.
d.
Cisco Aironet 340, 350, and CB20A Wireless LAN Client Adapters Installation and Configuration Guide for Windows
5-46
Click the Import button. The Import Protected Access Credentials (PAC) File screen appears
(see Figure 5-9).
Import Protected Access Credentials (PAC) File Screen
Find the location of the PAC file in the Look in box. The default location is My Documents.
If you browse to a different location to obtain the PAC, the new location becomes the
Note
default location going forward.
Click the PAC file (*.pac) so that it appears in the File name box at the bottom of the screen.
The filename and extension of PAC files is determined by the PAC authority that issues
Note
them, but the standard file extension is pac.
Click the Open button.
Chapter 5 Configuring the Client Adapter
OL-1394-08