Appendix
Figure B-12 Reconnecting the Power Cables to the Backplane
Front panel
Step 3
Replace the air separator, holding all cables to the right of the separator as you slip it into the chassis.
(See Figure B-13.)
Figure B-13 Replacing the Air Separator
Power
supply
Step 4
Reinstall the power supply mounting screw.
Step 5
Replace the chassis cover using the procedures in the "Replacing the Chassis Cover" section on
page B-12.
78-10754-03 0A
Power
supply
3
Power connector
Backplane
3
Front panel
Chassis bottom
Chassis bottom
Cisco AS5350 Universal Gateway Chassis Installation Guide
Installing the Power Supply
-11