Disconnecting The Power Connectors From The Backplane; Lifting The Power Supply Out Of The Chassis - Cisco AS5350 Installation Manual

Appendix
Note
Figure B-9
Front panel
Step 6 Slide the power supply toward the front panel to disengage the power supply from the chassis hooks.
(See Figure B-10.) Remove the power supply from the chassis.
Figure B-10 Lifting the Power Supply Out of the Chassis
78-10754-03 0A
The system board connector is located on the system board, below and left of the backplane
connector.

Disconnecting the Power Connectors from the Backplane

Power
supply
3
Power connector
Backplane
Power
supply
3
Front panel
Chassis bottom
Chassis bottom
Cisco AS5350 Universal Gateway Chassis Installation Guide
Removing the Old Power Supply
-9