Connecting A Signal Generator To The Bits Port; Connecting To The Bits Port - Cisco AS5350 Installation Manual

Chapter 3 Installing the Cisco AS5350

Connecting a Signal Generator to the BITS Port

Figure 3-14 Connecting a Modem to the Auxiliary Port
Auxiliary port
Modem
(RJ-45)
RJ-45-to-RJ-45
rollover cable
RJ-45-to-DB-25 adapter
(labeled MODEM)

Connecting a Signal Generator to the BITS Port

Use a coaxial cable to connect a Timing Signal Generator (TSG) to the BITS port. The BITS port is used
for external clocking. (See Figure 3-15.)
Figure 3-15 Connecting to the BITS Port
To timing signal
generator
Coaxial cable
BITS port
connector
Cisco AS5350 Universal Gateway Chassis Installation Guide
3-13
78-10754-03 0A