Chapter 4
Troubleshooting
Step 2
Use your right hand to rotate the other end of the fan tray towards the front panel of the chassis. Make
sure the fan tray power connector slides into the receptacle. (See Figure 4-9.)
Figure 4-9
Carefully slide the fan tray connector into its receptacle until the fan tray touches the front panel. (See
Step 3
Figure 4-9.)
78-10754-03 0A
Sliding the Fan Tray Power Connector into Receptacle
3
Cisco AS5350 Universal Gateway Chassis Installation Guide
Replacing the Fan Tray
4-11