Displaying Faults
Your login determines whether you can use this option.
Note
Procedure
Select Faults > Display Faults. The Fault window appears.
Step 1
Step 2
Use the Filter: bar to display the faults you want to view:
Table 2-1
Field
Devices
Severity
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
2-2
Display Faults Filter Bar
Chapter 2
Description
From the list, select the device type
whose fault summary you want to
display.
From the list, select the severity from
P1, which is the highest severity level
to P5, which is the lowest severity
level, to display:
•
P1—Severity P1 faults.
P1-P2—Severity P1 and P2 faults.
•
P1-P3—Severity P1 through P3
•
faults.
P1-P4—Severity P1 through P4
•
faults.
P1-P5—Severity P1 through P5
•
faults.
All—Severity P1 through P5
•
faults, and faults that have been
cleared.
Fault Monitoring
78-14947-01