Chapter 3
Configuring Devices
Step 3
Step 4
Defining the Ethernet Advanced Settings
78-14947-01
Complete the following:
Table 3-14 Ethernet Hardware Settings
Field
Description
Loss of
Enter the number of seconds the system must detect loss of
Backbone
backbone connectivity (i.e. loss of Ethernet link and no active
Connectivity #
trunk available on any of the radios) before taking the
of Secs (1-1000)
specified by Loss of Backbone Connectivity Action.
Loss of
From the list, select one of the following:
Backbone
•
Connectivity
•
Action
•
•
Loss of
Enter an SSID index required if the Loss of Backbone
Backbone
Connectivity Action is set to Restrict to SSID, or select the
Connectivity
SSID from the list.
SSID
Select one of the following in the left pane:
Preview to see your changes before you apply them. (See
•
Template, page
3-131.)
Finish to save the template. (See
•
•
Another template category to configure more options. (See
Categories, page
3-2.)
Use this option to define the settings and operational status of the Ethernet port.
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
No action
Switch to repeater mode
Shut the radio off
Restrict to SSID
Finishing the Template, page
Using the Templates
Previewing the
3-132.)
Template
3-53