Using the Templates
Table 3-24 11a Radio Advanced Settings (continued)
Field
Classify Workgroup Bridges as
network infrastructure
Ethernet encapsulation
transform
Enhanced MIC verification for
WEP
Temporal Key Integrity Protocol From the list, select the following:
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
3-84
Chapter 3
Description
From the list, select one of the following:
yes—Use this setting to limit the number
•
of workgroup bridges that can associate
to the access point to 20 or less.
no—Use this setting to allow more than
•
20 workgroup bridges to associate to the
access point.
From the list, select one of the following:
•
802.1H—Provides optimum
performance for Cisco Aironet wireless
products.
RFC1042—Ensures interoperability
•
with non-Cisco Aironet wireless
equipment.
From the list, select one of the following:
None—Does not enable MIC.
•
•
NMH—Enables MIC (Message Integrity
Check), a security feature that protects
your WEP keys by preventing attacks on
encrypted packets called bit-flip attacks.
None—Does not enable WEP key
•
hashing.
Cisco—Enables WEP key hashing that
•
defends against an attack on WEP in
which the intruder uses the unencrypted
initialization vector (IV) in encrypted
packets to calculate the WEP key.
Configuring Devices
78-14947-01