Cisco CiscoWorks 1105 User Manual page 149

Chapter 3 Configuring Devices
Procedure
Select Security > Local AP/Client Security. The Security: Local AP/Client
Step 1
Security dialog box appears:
Complete the following:
Step 2
Note
Table 3-28 Local AP /Client Security Settings
Field
Data Encryption by
Stations
Authentication Type
Open
78-14947-01
Clicking Clear removes all the current entries in the window and any
entries you have made in other Template windows up until that point.
Description
From the list, select the encryption type:
• No Encryption—Requires clients to communicate
with the Access Point without any data encryption.
This setting is not recommended.
Optional—Allows clients to communicate with the
•
Access Point either with or without data encryption.
Typically, this option is used when you have client
devices that cannot make a WEP connection, such as
non-Cisco clients in a 128-bit WEP environment.
Full Encryption—Requires clients to use data
•
encryption when communicating with the Access
Point. Clients not using data encryption are allowed
to communicate. This option is recommended if you
want to maximize the security of your Wireless
LAN.
From the list, select one of the following:
Yes—Allows any device, regardless of its WEP
•
keys, to authenticate and attempt to associate. This is
the recommended setting.
No—Does not allow any device, regardless of its
•
WEP keys, to authenticate and attempt to associate.
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
Using the Templates
3-95