Cisco CiscoWorks 1105 User Manual page 273

Chapter 5 Using Reports
Procedure
Select Reports > Current. The window refreshes with a device selector in the left
Step 1
pane.
If you want to search for the device, use the dialog box in the left pane above the
Step 2
device selector:
a.
b.
Step 3 From the device selector in the left pane, click to expand the folder and select the
access point for which you want a report. The right pane refreshes.
Step 4 From the Report Name list, select AP Policy Report.
Click View. The report is displayed with the following headings:
Step 5
Table 5-21 AP Policy Report
Column
Policy Group Id
Policy Group
Name
Ethertype Filter Id
(In)
Ethertype Filter Id
(Out)
IP Protocol Filter
Id (In)
78-14947-01
From the list, select the method you want to use to search for the device: by
name or by IP address.
Enter the IP address or name, or use an asterisk (*) as a wildcard to denote
numbers and letters, then click Search. The requested device appears in the
Search Results folder.
Description
The identification number for the policy group.
The name of the policy group.
The identification number of the (receive) Ethertype filter.
Click to see the AP Ethertype Protocol Filters Report—See
Displaying an AP Ethertype Protocol Filters Report,
page
The identification number of the (transmit) Ethertype filter.
Click to see the AP Ethertype Protocol Filters Report—See
Displaying an AP Ethertype Protocol Filters Report,
page
The identification number of the (receive) IP protocol
filter.
Click to see the AP Ethertype Protocol Filters Report—See
Displaying an AP IP Protocol Filters Report, page
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
5-32.
5-32.
Displaying Current Reports
5-33.
5-37