Makita VC2211M Instruction Manual page 7

013377
1. Extend the filter bag.
013378
2. Align the filter bag opening with the dust suction
opening of the cleaner.
3. Insert the cardboard of the filter bag onto the tool
so that it is positioned at the end beyond the
detent protrusion.
When disposing the filter bag, pull the edge on the filter
bag's mouth so that the mouth is closed by a paper.
Installing polyethylene bag
Cleaner can also be used without polyethylene bag.
However, using polyethylene bag is easier to empty the
tank without letting your hands dirty.
1
3
013383
Spread the polyethylene bag in the tank. Insert it
between the holder plate and the tank, and pull it to the
hose inlet.
1
2
013384
1. Filter bag
1
1. Filter bag
1
1. Holder plate
2. Polyethylene
bag
2
3. Tank
1. Holder plate
2. Polyethylene
bag
Spread the bag around the top of the tank.
Hook up the other side of the bag around the top of the
tank so that the prefilter hook can catch and hold it
securely.
NOTE:
A polyethylene bag available on the market can be
•
used. The
recommended.
Too much dust will tear the bag easily, so do not
•
collect the dust more than the half of the bag
capacity.
Disposing the polyethylene bag
WARNING:
Always make sure that the cleaner is switched off
•
and unplugged before emptying the polyethylene
bag. Failure to do so may cause an electric shock
and serious personal injury.
CAUTION:
Do not apply a great impact on the air filter and
•
tank. Applying a great impact may cause
deformation and damage to air filter and tank.
Empty the tank at least once a day although this
•
depends on picked-up dust volume in the tank. Or,
the suction force will weaken and the motor may
be broken.
Do not grab the hook when emptying the tank.
•
Grabbing the hook may cause the hook to break.
013385
Unhook and lift up the tank cover.
7
0.04 mm or thicker
1. Tank cover
2. Hook
1
2
one is