Makita TL065D Instruction Manual
Cordless angle impact driver / cordless angle impact wrench
Hide thumbs
Also See for TL065D:
- Instruction manual (81 pages) ,
- Instruction manual (61 pages) ,
- Instruction manual (57 pages)
Related Manuals for Makita TL065D
Summary of Contents for Makita TL065D
- Page 1 INSTRUCTION MANUAL Cordless Angle Impact Driver / Cordless Angle Impact Wrench TL064D / TL065D Read before use.
-
Page 2: Specifications
) : 102 dB (A) material! Uncertainty (K) : 3 dB(A) In observance of the European Directives, on Waste Electric and Electronic Model TL065D Equipment and Batteries and Accumulators Sound pressure level (L ) : 90 dB(A) and Waste Batteries and Accumulators... -
Page 3: Ec Declaration Of Conformity
Uncertainty (K) : 1.5 m/s Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any Model TL065D adapter plugs with earthed (grounded) power Work mode: impact tightening of fasteners of the maxi- tools. - Page 4 Dress properly. Do not wear loose clothing or Use power tools only with specifically desig- jewellery. Keep your hair and clothing away nated battery packs. Use of any other battery from moving parts. Loose clothes, jewellery or packs may create a risk of injury and fire. long hair can be caught in moving parts.
- Page 5 It will WARNING: DO NOT let comfort or familiarity also void the Makita warranty for the Makita tool and with product (gained from repeated use) replace charger. strict adherence to safety rules for the subject Tips for maintaining maximum product.
-
Page 6: Functional Description
Overloaded: FUNCTIONAL The tool is operated in a manner that causes it to draw an abnormally high current. DESCRIPTION In this situation, turn the tool off and stop the application that caused the tool to become overloaded. Then turn the tool on to restart. CAUTION: Always be sure that the tool is If the tool does not start, the battery is overheated. - Page 7 Switch action Reversing switch action ► 1. Switch lever ► 1. Reversing switch lever CAUTION: CAUTION: Before installing the battery car- Always check the direction of tridge into the tool, always check to see that the rotation before operation. switch lever actuates properly and returns to the CAUTION: Use the reversing switch only after "OFF"...
-
Page 8: Installing Hook
To install the driver bit, pull the sleeve in the direction of Installing or removing socket the arrow and insert the driver bit into the sleeve as far as it will go. Always use the correct size socket for bolts and nuts. Then release the sleeve to secure the driver bit. -
Page 9: Operation
Ratchet head Adjusting the angle head The angle head can be adjusted 360°(8 positions in 45-degree increments). Loosen the hex bolt and remove the angle head. OPERATION ► 1. Angle head 2. Hex bolt CAUTION: Always insert the battery cartridge Adjust the angle head to the desired position and all the way until it locks in place. - Page 10 High tensile bolt Operating the tool at low speed will cause a reduc- tion in the fastening torque. NOTE: Use the proper bit for the head of the screw/ (kgf cm) bolt that you wish to use. NOTE: Hold the tool pointed straight at the screw. (408) NOTE: If the impact force is too strong or you tighten the screw for a time longer than shown in the figures,...
-
Page 11: Maintenance
Discoloration, deformation or cracks may result. To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjustment should be performed by Makita Authorized or Factory Service Centers, always using Makita replacement parts. OPTIONAL ACCESSORIES CAUTION:... - Page 12 Makita Europe N.V. Jan-Baptist Vinkstraat 2, 3070 Kortenberg, Belgium Makita Corporation 3-11-8, Sumiyoshi-cho, Anjo, Aichi 446-8502 Japan 885572-220 www.makita.com 20170131...