Makita DHR400PT2 Instruction Manual page 13

2
► 1 . Hose holder 2. Shaft 3. Side grip
2. Attach the holder joint to the tool, and then attach
the hose holder to the holder joint.
► 1 . Holder joint 2. Hose holder
1
3
1
2
3. Attach the dust cover and the hose to the tool, and
then fix the hose to the hose holders.
1
► 1 . Dust cover 2. Hose 3. Hose holder
4. Connect the hose to the hose of the vacuum
cleaner with the hose joint.
NOTE: If the hose is not included, attach the dust
cover to the cleaner's joint or attach it to Makita's
hose ø28.
5. Adjust the distance between the dust cover and
the tip of the chisel or bull point. The recommended
distance is 30 mm to 100 mm.
(1)
► ( 1) 30 mm to 100 mm
13 ENGLISH
2 3
3