Maintenance Programming Level; 1: Input Zones - Enable/Disable; 2=History - Honeywell FIRE-LITE MS-10UD Series Manual

Programming

3.6 Maintenance Programming Level

To access Maintenance Programming mode, press the Enter key. The LCD will display the following:
To enter the Maintenance Programming mode, press 2. The display will read as follows:
When the Maintenance level password (default 11111) is entered, the following screen will appear:
Note that in the preceding screens, an arrow appears to inform the programmer that additional options can be viewed by pressing the
keypad down arrow key, as shown in the following screen.
3.6.1 Input Zones - Enable/Disable
PROGRAMMING
1=INPUT ZONES

2=HISTORY

3=WALKTEST
Maintenance Screen #1
Pressing the down arrow key will display additional Zones (Zones 4 - 5 for MS-5UD and Zones 4 - 10 for MS-10UD). Select the number
corresponding to the desired zone. A screen will appear which will allow enabling or disabling of the selected zone, as illustrated in the
following example:
Pressing 1 repeatedly will cause the display to toggle between Enabled Yes and Enabled No.
3.6.2 History
Pressing 2 while viewing Maintenance Screen #1 will cause the following screen to be displayed:
The History feature allows the operator to view control panel events which have been stored in a history file in memory and erase the
contents of the history file
Pressing 1 while viewing the History screen will cause the following screen to be displayed:
94
1=READ STATUS
2=PROGRAMMING
3=REMOTE DOWNLOAD
PROGRAMMING
ENTER PASSWORD
PROGRAMMING
1=INPUT ZONES
2=HISTORY
3=WALKTEST
PROGRAMMING
1=TIME-DATE
The Zone Setup option allows the user to enable or disable desired zones. Pressing 1 for Zone Setup, while
viewing Maintenance Screen #1 will cause the following screens to be displayed:
POINT PROGRAM
1=ZONE 1
2=ZONE 2
3=ZONE 3
Zone Select Screen
1=ENABLED
Enable/Disable Select Screen
HISTORY
1=VIEW EVENTS
2=ERASE HISTORY
History Screen
HISTORY
1=VIEW ALL
2=VIEW ALARMS
3=VIEW OTHER EVENTS
ZONE 1
YES
MS-5UD & MS-10UD Series Manual — P/N 52626:C7 6/12/2018
Maintenance Programming Level