Honeywell FIRE-LITE MS-10UD Series Manual page 58

Programming
Pre-signal
The Pre-signal option programs the zone to delay panel activation for a preprogrammed time delay of up to three minutes while allowing
for visual verification by a person. Note that the alarm relay and communicator will respond to the initial alarm immediately. To enable
the Pre-signal feature, press 2 while viewing PAS/Pre-Signal Screen. Refer to "Presignal" on page 100.
58 MS-5UD & MS-10UD Series Manual — P/N 52626:C7 6/12/2018
Master Programming Level