Advertisement
cC
Inspect the used oil after it has been
drained. If the oil is milky, water is get-
ting into the gearcase which can cause
gear damage. Consult a Yamaha dealer
for repair of the lower unit seals.
NOTE:
601033
For disposal of used oil consult your
Yamaha dealer.
5) With the outboard motor in an verti-
cal position, using a flexible or pres-
surized filling device, inject outboard
motor hypoid gear oil (SAE 90) into
the oil drain plug hole.
Gear oil capacity:
Refer to SPECIFICATIONS, Page 4-1.
6) When oil begins to flow out of the oil
level plug hole, insert and tighten the
oil level plug.
7) Screw in the oil drain plug.
EML24010
INSPECTING AND REPLACING
ANODE
603024
Yamaha outboard motor is protected
from corrosion by a sacrificial anode.
Check the anode periodically. Remove the
scales from surfaces of the anode.
For the replacement of the anode, consult
a Yamaha dealer.
cC
Do not paint the anode, for this would
render it ineffective.
405016
4-21
GB
Advertisement
Chapters
