Download Print this page

Running Single Engine; Power Trim/Tilt Will Not Operate - Yamaha 250A Owner's Manual

Advertisement

GB
EMU00418

RUNNING SINGLE ENGINE

Using only one of the engines in case of
an emergency, be sure to keep the
unused one tilted up and operate the
other engine at low speed.
cC
If the boat is operated with one engine in
the water but not running, water may run
102043
into the exhaust pipe due to wave action,
causing engine trouble.
NOTE:
When you are maneuvering at low speed,
such as near a dock, it is recommended
that both engines be running with one in
neutral gear if possible.
EMG65110
POWER TRIM / TILT WILL NOT
OPERATE
If the engine cannot be tilted up or down
with the power trim and tilt because of a
q
discharged battery or a failure with the
power trim and tilt unit, the engine can be
tilted manually. Loosen the manual valve
screw counterclockwise until it stops. Put
411032
the engine in the desired position, then
tighten the manual valve screw clockwise.
1 Manual valve screw
5-6

Advertisement

Chapters

loading

This manual is also suitable for:

L250a250aetoL250aeto